Modernize Schneider Concept programs
Start with the Concept program that runs your machine. Altitude uses its exported logic to map old addresses to the replacement PLC and flag what needs a check on site.
- Vendor
- Schneider Electric
- Files
- .ASC (ASCII export)Program listingsI/O list
- 1 Add the exported sources and symbols
- 2 Review the converted routines and outstanding mappings
- 3 Compile and test the target project
Everything a Concept file holds, in one conversation
Build a source inventory and review the replacement logic.
- Recover the sequence and references from readable sections
- Map legacy addresses and document decisions for the target engineer
- After Control Expert’s converter, carry the project on to Studio 5000, TIA Portal, TwinCAT 3, CODESYS, SEL RTAC, Do-more or Sysmac Studio with the translator
- Check against industrial standards such as IEC 61131-3, ISA-88, ISA-95 and PackML, or your own
Requests engineers type every day
- Document the sequencing in this Concept export.
- Which addresses need mapping on the new PLC?
The work Concept projects need most
Read beside the rest of the line
Studio 5000 Logix Rockwell Automation ControlLogix, CompactLogix and GuardLogix projects, from .L5X and .L5K exports. .L5X.L5K RSLogix 500 Rockwell Automation SLC 500 and MicroLogix ladder, data files and descriptions, from the .SLC export and its .SY6. .SLC.SY6.SY5.EAS RSLogix 5 (PLC-5) Rockwell Automation PLC-5 ladder, data files and documentation, from the .PC5 export and its .CSV. .PC5.CSV.EAS TIA Portal Siemens S7-1200, S7-1500, S7-300 and S7-400 programs, from TIA Portal V14 to V21 exports. SimaticML.scl.awl.db
See Altitude on your Concept files
We'll walk through the requests that matter to your team on the platforms you run, from review and troubleshooting to documents and migration.